Audtek 14/2 OFC In Wall Speaker Wire Cable CL2 100 Ft

Upgrade Your Home Theater Experience

Don’t settle for low-quality speaker cables that degrade your home theater or whole-house audio system’s performance. Instead, opt for the high-quality Audtek 14/2 OFC In Wall Speaker Wire Cable CL2 100 Ft. This audiophile grade speaker cable is designed to provide exceptional sound quality and is UL listed and CL2-rated for in-wall installations.

Audiophile Grade Speaker Cable

Audtek Electronics’ fine copper wire strands minimize capacitance that causes low frequency losses, and each insulated conductor is twisted tightly in pairs to reduce high frequency attenuation caused by excessive inductance. This tight twist also results in a rounder cable profile, making the product much easier to pull around sharp-cornered studs or through conduit.

Easy Installation

The smooth, easy to feed, tube-style outer jacket of the Audtek in-wall cable makes installation and wire preparation a breeze. Plus, the cable is flexible enough to use as speaker cables outside of walls, giving you more installation options.

Oxygen-Free Copper Conductors

Audtek uses pure oxygen-free copper strands in its OFC speaker wire, which means the copper strands go through an additional process, making it more than 99% pure copper. This results in reduced resistance, which increases conductivity and delivers more wattage/current to speakers or other components.

Why Choose OFC Over CCA?

Pure copper’s conductivity is 35% to 40% better than CCA (Copper Clad Aluminum) due to the resistance that aluminum strands add to the signal transfer. CCA wire is also very hard to get good solder results when making your own cables, and even in premade cables, the wires are more likely to separate from the connectors and cause intermittent failures.

Specifications and Features

The Audtek 14/2 OFC In Wall Speaker Wire Cable CL2 100 Ft features individual conductors of 41 x 30 AWG, with an individual conductor overall diameter of 2.5 mm and an overall cable diameter of 6.70 mm. The DCR is 0.88 ohms/100 meters, and the cable is dispensed from a plastic spool. Sequential foot markers indicate cable remaining on the spool, making it easy to measure the right length for your installation.